Causes Of Voltage Drop

When there is a large voltage drop, it can cause the light to flicker or dim, it can affect the operation of the heaters, so that they will heat less, and the motors can burn out because they will heat up too much. To avoid all these situations, you can use a voltage drop calculator to make accurate calculations for your circuit.

The causes of voltage drop can be different. It is very important to choose the right material for the wire. The metals that have the best electrical conductivity are gold, silver, copper and aluminum. Copper and aluminum are used the most because of their low cost compared to silver and gold. However, copper is better than aluminum and it has a much smaller voltage drop compared to the thickness and length of the wire.

Also, wire size has a big impact on voltage drop. Wires with a larger cross-section will always have a lower voltage drop than wires with a smaller cross-section, assuming they are the same length.

The voltage drop also depends on the length of the wire. For wires that have the same cross-section, the voltage will drop sooner with a wire that has a longer length.

Of course, the amount of current that is transmitted has a great influence on the voltage drop. When the current through the wire increases it will result in a voltage drop.

To prevent these voltage drops from happening to you and to keep your devices working properly, use a voltage drop calculator to help you place the correct wiring wherever you need it.